Original: $40.79
-65%$40.79
$14.28The Story
Hansen Full Flow (Lilac) Handle Ball Valve
Hansen Full Flow Ball Valves can be used anywhere the flow of fluid needs to be stopped or started. The entire Ball Valve range is available in BSPT and NPT threadsÂ
Ideal for grey water applications. Â
| Model | Metric | Imperial |
| HBVL15 | 15mm | 1/" |
| HBVL20 | 20mm | 3/4" |
| HBVL25 | 25mm | 1"Â |
| HBVL32 | 32mm | 1 1/4" |
| HBVL40 | 40mm | 1 1/2" |
| HBVL50 | 50mm | 2"Â |
NPT Available on request, non stock item
Features
- High Quality True Full Flow Valves
- AS/NZS 4020 potable water & SGS M&I approved
- Removable Handle For Security
- International Colour Coded Handles;
Blue Handle General Use
Lilac Handle Grey Water Use - Non Corrosive Materials
- UV Stabilised
- Pressure Rating: 16 Bar/235 PSI @ 20°C
- Positive Click Open
- Smooth Open & Close Action
- Can be used in conjunction with all other HANSEN Fittings
Overview
Hansen's range of full flow ball valves have been designed for use for use in above or below ground in fluid distribution lines.
The Valves are strong, lightweight, compact and provide smooth unrestricted leak free on / off control. The Hansen Full Flow Ball Valve range will function across a wide range of operating pressures and temperatures and can be used anywhere the flow of liquid needs to be stopped or started.
High pressure rated to 16 Bar. Removable handles to help differentiate between a range of different applications. Non corrosive, potable water approved and built to last!
Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.
Hansen Ball Valves are Frost Friendly and have been tested in frost conditions. Results may vary in freezing conditions. Parts and materials: Body & End Caps - Glass Fibre Reinforced Nylon Handle - Glass Fibre Reinforced Nylon Ball - Polypropylene Ball Seats & Stem - Acetal (POM) O-Rings - Nitrile Rubber
Brochure
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Hansen Full Flow (Lilac) Handle Ball Valve
Hansen Full Flow Ball Valves can be used anywhere the flow of fluid needs to be stopped or started. The entire Ball Valve range is available in BSPT and NPT threadsÂ
Ideal for grey water applications. Â
| Model | Metric | Imperial |
| HBVL15 | 15mm | 1/" |
| HBVL20 | 20mm | 3/4" |
| HBVL25 | 25mm | 1"Â |
| HBVL32 | 32mm | 1 1/4" |
| HBVL40 | 40mm | 1 1/2" |
| HBVL50 | 50mm | 2"Â |
NPT Available on request, non stock item
Features
- High Quality True Full Flow Valves
- AS/NZS 4020 potable water & SGS M&I approved
- Removable Handle For Security
- International Colour Coded Handles;
Blue Handle General Use
Lilac Handle Grey Water Use - Non Corrosive Materials
- UV Stabilised
- Pressure Rating: 16 Bar/235 PSI @ 20°C
- Positive Click Open
- Smooth Open & Close Action
- Can be used in conjunction with all other HANSEN Fittings
Overview
Hansen's range of full flow ball valves have been designed for use for use in above or below ground in fluid distribution lines.
The Valves are strong, lightweight, compact and provide smooth unrestricted leak free on / off control. The Hansen Full Flow Ball Valve range will function across a wide range of operating pressures and temperatures and can be used anywhere the flow of liquid needs to be stopped or started.
High pressure rated to 16 Bar. Removable handles to help differentiate between a range of different applications. Non corrosive, potable water approved and built to last!
Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.
Hansen Ball Valves are Frost Friendly and have been tested in frost conditions. Results may vary in freezing conditions. Parts and materials: Body & End Caps - Glass Fibre Reinforced Nylon Handle - Glass Fibre Reinforced Nylon Ball - Polypropylene Ball Seats & Stem - Acetal (POM) O-Rings - Nitrile Rubber
Brochure
